Carpet poles are manufactured from high tensile steel.

Standard poles are 2.5" in diameter.

Standard pole has a 2,500 LB. capacity evenly distributed.

Larger diameter poles available upon request.

Fork mounted styles will handle up to 2" x 7" forks

Available in Light (750 lbs.), Medium (1500 lbs.) and Heavy Duty (2000 lbs.) series.  Medium series shown.

Automatic single clamping mechanism

Will handle any size steel or plastic chimed drum

Fork pockets can handle up to a 2" x 6" fork

Fork Extensions should not exceed 1.5 times the length of the fork. Extensions for shaft mounted forks are available upon request. Extensions available in 48", 54", 60", 72", 84" & 96" lengths

Lift and Tilt jibs are both fork mounted.

Secured by chain to the fork carriage.

All jibs come with two hooks.

Fork pockets handle up to 2" x 7" forks

Load Backrests are manufactured to order.  Contact us for more details.

42" High square tubular steel rails.

Swing door is standard.

Safety chain to fasten man basket to carriage.

4" high kickplate round entire floor.

60" back height with safety harness latch point.

3" x 9" fork pockets

Meets all OSHA requirements when used with a full safety harness and lanyard.

Tooth grip pads

Can be used on pallets with center stringers at least 3" high and up to a maximum of 2" wide.