SpaceGuard - Rail Guard Handrails

Mezzanine Handrail System


RailGuard by SpaceGuard Products is an inexpensive alternative to traditional handrail. It's simple to install, and provide more safety due to the wire mesh and kick plate design. Objects can't fall through, and the product meets OSHA and BOCA code requirements of a 200 pound load applied in any direction at any point on the rail. RailGuard utilizes 2" tubular posts and handrail; the panels are high integrity welded 1 1/4" angle frame, with 1 1/2" wire mesh welded in place. Panels are through bolted to the posts for rigid, secure protection. Special panel sizes can be provided, and six colors are available at no extra charge.

Panels

	10 gauge triple crimped steel wire woven in 1 1/2" diamond mesh securely welded to frames.
	Frames made of 1 1/4" x 1 1/4" x 1/8" roll formed angle, with all joints arc welded. Frame to be quipped with slotted holes for quick mounting to other panels and posts.
	Stiffener bar consists of 1/4" x 3/4" thick hot rolled, flat stock which is tack welded to mesh to ensure rigidity and to reduce billowing.
	Kick plate at bottom of panel to be 1/8" x 3" steel plate above 1 1/4" angle.

Posts

	14 gauge steel to be of 2" x 2" square.
	Base plates of 2" x 7" x 1/4" steel flat stock welded to posts for secure anchoring to floor.
	Posts will be drilled with 5/16" holes to accept all hardware for doors and panels.

Doors

	Doors are to be constructed of materials to match the panes.
	Each Hinge door to be provided with two 3" x 3" steel hinges. Latches are provided with hinge doors.

Hardware

All items furnished with appropriate hardware. Field bracing and floor anchors by installer.

Finish

Standard finish is a one coat of high quality semi-gloss safety yellow or 5 additional colors.

Shipment

Each order can be palletized to prevent freight damage. This is dependent on the size of the order.